ATG headlight restoration kit

videos

Product description

Article-No. ATG112

Our ATG Headlight Restoration Kit is perfect for making your dull and dull headlights shine again.

Clean and polish your headlights like a pro with our set. With the included tools and resources, you can thoroughly clean the surface of your headlights and remove scratches. By cleaning the headlight surface, night vision is improved and the headlights look like new again.

The UV seal protects your headlights from UV radiation. The headlight cleaning set from ATG is suitable for both beginners and professionals. With it you can polish and coat your headlights in a few minutes.

This set is the perfect choice for anyone who wants more safety on the road. It is suitable for all common plastic headlights.

So, what are you waiting for? Get our headlight cleaning set now and ensure better visibility at night and a new look for your headlights!

Application note:

In order to ensure good curing of the seal, the vehicle / headlight should be left in the sun for at least 2 hours after application and then allowed to dry for at least 24 hours. Alternatively, a commercially available UV lamp can be used.

Areas of application: car - motorcycle - truck - boat - bus - caravan

Storage:

• Protect from sun exposure.
• Protect from frost and heat.
• To avoid risks to people and the environment, comply with the instructions for use.
• Keep out of the reach of children and animals.
• The product is not suitable for consumption.
• We assume no liability for application errors

Package contents

The set contains everything you need for preparation

• 1 x 85 gr. polishing paste
• 2 x 3ml UV protection
• 6 x sandpaper (2 each of grit P800, P1200, P2000)
• 1 x masking tape
• 1 x orange polishing sponge
• 1 x polishing cloth
• 1 x Drill Attachment
• 1 x rotary plate
• 1 x instruction manual

Manual and data sheets for download

	MSDS for download
	Multilingual manual for download

FAQ

1. What do I have to consider at the end when applying the UV sealant?
   Please make sure that the headlight is completely transparent, cleaned and dry after polishing. Then, using a clean sponge, apply the "Step 3" UV sealant evenly to the headlight in the shade/garage. Now wait 10-15 minutes so that the liquid is evenly distributed on the headlight. Then place your vehicle in direct sunlight for approx. 2-3 hours so that the UV protective liquid cures quickly and no dust accumulates. Alternatively, a standard UV lamp can be used for curing (not included). A car wash is possible again after approx. 24 hours.
2. My headlight looks worse after treatment than before, what can I do about it?
   If your headlights are still smeared despite following the instructions, you can sand off the UV protection fluid again and repeat the application.
3. How many headlights can be processed with the kit?
   The kit is designed for the preparation/polishing of 2 headlights.
4. What speed should the cordless screwdriver be set to?
   Set the cordless screwdriver to a slow speed for the work steps.
5. Can I also use it to polish my taillights?
   No! Our ATG headlight preparation set is only suitable for use with front headlights made of plastic, acrylic glass or Plexiglas.
6. Can I also polish glass headlights with it?
   No! Our ATG headlight preparation set is only suitable for use with front headlights made of plastic, acrylic glass or Plexiglas.